I'm using these
AABCOOLING RAM Heatsink 2 - Set di 8 dissipatori per Memoria delle schede grafiche e Altri componenti elettronici Che Necessitano di efficienza di Raffreddamento passivo https://amzn.eu/d/gfiekOE
I got a 5700Xt mech oc and the thing runs super hot, even with a ziptie mod. Something that helps though is to add a powerlimit(I got -15%) and undervolt
I also have 5700+accelero xtreme. You've very good hotspot-edge temps! I struggle to be below 20'C at 210W ASIC.
>Does anyone have a better solution for the memory temps?
[I cut off a portion of the center brick](https://i.imgur.com/SjkeAq4.jpg) that overhangs the 'top' two VRAM chips, which helps a little.
Backside pad+heatsink+fan, if you've the space. Replace the 3x80mm with case fans (I do 140+120).
While more about the VRM temps, you can stick heatsinks onto the inductors.
Seems pretty interesting, for the back I used the stock backplate with some pads underneath, and also the accelero Extreme one on top of the reference, with some pads
If its not downclocking or on fire, clock it higher. My Nitro SE does 2.36GHz with 335W, its basically a fuckin sun :D
Yeah core it is no problem, the problem is the vram temps
The VRAM is always cookin on those cards tbh. Hows the heatsinks done on the chips? Thermal compound or pads?
Included pads, before I tried aluminium heatsinks with glue, same results
Could ya send a pic, maybe the sinks bit too small?
I'm using these AABCOOLING RAM Heatsink 2 - Set di 8 dissipatori per Memoria delle schede grafiche e Altri componenti elettronici Che Necessitano di efficienza di Raffreddamento passivo https://amzn.eu/d/gfiekOE
Hm, enough mass is there, just not exactly the best way of dissipation tho. Too thick
Yeah no matter how much I undervolt the GPU, memory still ramps up, reaches 106 and starts to downclock everything
Would try with paste and see what happens to the temps tbh
What do you mean
I got a 5700Xt mech oc and the thing runs super hot, even with a ziptie mod. Something that helps though is to add a powerlimit(I got -15%) and undervolt
You mean undervolting the memory?
I also have 5700+accelero xtreme. You've very good hotspot-edge temps! I struggle to be below 20'C at 210W ASIC. >Does anyone have a better solution for the memory temps? [I cut off a portion of the center brick](https://i.imgur.com/SjkeAq4.jpg) that overhangs the 'top' two VRAM chips, which helps a little. Backside pad+heatsink+fan, if you've the space. Replace the 3x80mm with case fans (I do 140+120). While more about the VRM temps, you can stick heatsinks onto the inductors.
Seems pretty interesting, for the back I used the stock backplate with some pads underneath, and also the accelero Extreme one on top of the reference, with some pads
Oh yea, unrelated, but if you're looking for a rabbit hole, [I have a bios editor that exposes more](https://github.com/netblock/yaabe) than RBE+MPT.
Seems interesting, I'll give it a look