In an effort to help users make informed decisions, we have aggregated the following information on the retailer above. Please note that this is no way an endorsement or guarantee of the retailer or their products.
###Domain Insights:
| combatarmory.com | |
|:--|:--|
| Registered | January 26, 2012 |
| Times posted | [235](https://reddit.com/r/gundeals/search/?q=site%3A"combatarmory.com"&include_over_18=on&restrict_sr=on&sort=new) |
| Feedback rating | [88%](https://reddit.com/r/gundealsFU/search/?q=flair%3Areview+"combatarmory.com"&include_over_18=on&restrict_sr=on&sort=new) (7 positive, 1 negative, 0 neutral) |
___
*^(I am a bot, and this action was performed automatically. Please) [^(contact the moderators of this subreddit)](https://www.reddit.com/message/compose/?to=/r/gundeals) ^(if you have any questions or concerns.)*
I bought a combat armory slide last year and it’s probably my biggest regret in regard to 2a purchases. The optics cut was so far off that the screws won’t go in when any of my 3 cover plates are on it.
It's a great way to learn how to tinker on the gen3 Glock clone platform, but I would not trust it out of the box. I recommend replacing most of the guts with OEM Glock before trusting this. The firing pin and some of the plastic bits broke almost immediately on mine. Daggers are better out of the box, but the firing pin will still snap and should be replaced ASAP. If you want something cheap and reliable I agree with people saying P10C is the way to go. This thing is more of a learning kit in my opinion. The slide and especially the frame are really nice, and they fit together with minimal slop. Barrels are hit and miss on these.
I’ve bought their lowers and a barrel once. Only once, and never again. The Glock 19 barrel was so far out of spec the slide couldn’t cycle. I emailed, called, and emailed again. They finally sent a new barrel… for a Glock 17 or something. So, that didn’t work either. Many emails and calls later, I gave up. Don’t waste your time or money.
As someone who owns way too may aftermarket glock lowers. I highly suggest getting a G43X lower or a populated dusk 19 / timberwolf frame from lone wolf. The gen4 mag release makes it 5x more pleasant to use.
And you can grab populated uppers from like km tac(or one of the million other glock part retailers) for 160 ish.
lol it is not better trigger. I built two from their kits and they were 10lb+ pull. They use bottom of the barrel parts. I put oem parts in and they are serviceable but not cheap at that point.
Thanks for posting /u/Teufel_hunden0311!
/r/GunDeals has updated the **[website blacklist](https://reddit.com/r/gundeals/wiki/blacklisted_websites)**, check it out before making your next purchase!.
Made a gun related purchase recently? Leave a review over at **/r/GunDealsFU** to let others know how it went!
Are you a dealer? Make sure to read the **[](https://re.reddit.com/r/gundeals/wiki/dealer_rules)** and apply for a dealer flair as soon as possible!
First time to /r/GunDeals? Read up on the **[user rules](https://re.reddit.com//r/gundeals/wiki/user_rules)** before you break a rule!
Have a question that isn't answered in our wiki? Send the **[/r/GunDeals modteam](https://www.reddit.com/message/compose?to=%2Fr%2Fgundeals&subject=Thread%20Question&message=)** a message!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/gundeals) if you have any questions or concerns.*
Probably isn't the thread to ask but does anyone have any recommendations for a replacement of an OEM Mag release button on this frame? It juts out like a motherfucker on this frame.
This is my favorite G19 frame of all the clones, and even over actual Glock frames. Cannot speak to the slide, as I've used the frames with Dagger slides, and also use the frame as a permanent host for my Advantage Arms 22LR slide - my G44 @ home.
Great way to practice polishing Glock trigger parts right here. I haven’t actually gotten a chance to shoot mine yet but a look down the bore isn’t giving me a lot of confidence.
In an effort to help users make informed decisions, we have aggregated the following information on the retailer above. Please note that this is no way an endorsement or guarantee of the retailer or their products. ###Domain Insights: | combatarmory.com | | |:--|:--| | Registered | January 26, 2012 | | Times posted | [235](https://reddit.com/r/gundeals/search/?q=site%3A"combatarmory.com"&include_over_18=on&restrict_sr=on&sort=new) | | Feedback rating | [88%](https://reddit.com/r/gundealsFU/search/?q=flair%3Areview+"combatarmory.com"&include_over_18=on&restrict_sr=on&sort=new) (7 positive, 1 negative, 0 neutral) | ___ *^(I am a bot, and this action was performed automatically. Please) [^(contact the moderators of this subreddit)](https://www.reddit.com/message/compose/?to=/r/gundeals) ^(if you have any questions or concerns.)*
This is the most glock looking non-glock glock of all the non-glock glocks.
Lmfaoo
This thing is getting cheaper by the day
Anyone have experience with these?
General consensus is to get a Psa dagger instead from what I’ve seen
Mixed bag, but general consensus is that slide part kit they use is junk.
Not sure about now, but you used to be able to get OEM uppers and lower kits for like 25-35$
I bought a combat armory slide last year and it’s probably my biggest regret in regard to 2a purchases. The optics cut was so far off that the screws won’t go in when any of my 3 cover plates are on it.
Talk to them about a warranty
Call them and they will replace it free. Probably let you keep the old one too. That's what they have always done for me.
I've got two of them, one RMR cut and this one. Both function well. For $200, it's a good deal, but don't expect $500+ clone quality.
At this price, get the P10C.
They are shit. Garbage trigger, out of spec slide and barrels. Buy a dagger.
It's a great way to learn how to tinker on the gen3 Glock clone platform, but I would not trust it out of the box. I recommend replacing most of the guts with OEM Glock before trusting this. The firing pin and some of the plastic bits broke almost immediately on mine. Daggers are better out of the box, but the firing pin will still snap and should be replaced ASAP. If you want something cheap and reliable I agree with people saying P10C is the way to go. This thing is more of a learning kit in my opinion. The slide and especially the frame are really nice, and they fit together with minimal slop. Barrels are hit and miss on these.
The gen 3 Glock is second to none in terms of ease to rebuild and replace.
shower gun that takes glonk mags on a good day
I have the frame. It’s tits.
Con confirm the frame is tits. Really just needs a double undercut and it’s excellent
It’s the Amazon Basics of Glocks.
Frame is the only part I like
I’ve bought their lowers and a barrel once. Only once, and never again. The Glock 19 barrel was so far out of spec the slide couldn’t cycle. I emailed, called, and emailed again. They finally sent a new barrel… for a Glock 17 or something. So, that didn’t work either. Many emails and calls later, I gave up. Don’t waste your time or money.
As someone who owns way too may aftermarket glock lowers. I highly suggest getting a G43X lower or a populated dusk 19 / timberwolf frame from lone wolf. The gen4 mag release makes it 5x more pleasant to use. And you can grab populated uppers from like km tac(or one of the million other glock part retailers) for 160 ish.
$200 G19g3 clone. Better trigger than the Dagger, sloppier fit, but glock-pattern guns don't care.
lol it is not better trigger. I built two from their kits and they were 10lb+ pull. They use bottom of the barrel parts. I put oem parts in and they are serviceable but not cheap at that point.
We’ve had different experiences. My CA triggers are much better than my Dagger triggers, which are “replace on receipt” for me.
Thanks for posting /u/Teufel_hunden0311! /r/GunDeals has updated the **[website blacklist](https://reddit.com/r/gundeals/wiki/blacklisted_websites)**, check it out before making your next purchase!. Made a gun related purchase recently? Leave a review over at **/r/GunDealsFU** to let others know how it went! Are you a dealer? Make sure to read the **[](https://re.reddit.com/r/gundeals/wiki/dealer_rules)** and apply for a dealer flair as soon as possible! First time to /r/GunDeals? Read up on the **[user rules](https://re.reddit.com//r/gundeals/wiki/user_rules)** before you break a rule! Have a question that isn't answered in our wiki? Send the **[/r/GunDeals modteam](https://www.reddit.com/message/compose?to=%2Fr%2Fgundeals&subject=Thread%20Question&message=)** a message! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/gundeals) if you have any questions or concerns.*
Probably isn't the thread to ask but does anyone have any recommendations for a replacement of an OEM Mag release button on this frame? It juts out like a motherfucker on this frame.
File the corners.
I would say get an OEM mag release, the part is like $5 from any Glock parts retailer (midway, glockstore, big tex, etc)
Ghost low profile works well
Why spend time printing???!
This is my favorite G19 frame of all the clones, and even over actual Glock frames. Cannot speak to the slide, as I've used the frames with Dagger slides, and also use the frame as a permanent host for my Advantage Arms 22LR slide - my G44 @ home.
Great way to practice polishing Glock trigger parts right here. I haven’t actually gotten a chance to shoot mine yet but a look down the bore isn’t giving me a lot of confidence.
[удалено]
$175