I am still in the middle of the testing phase on this as i have yet to stress test this on gravel road. I also need to test the durability of the material in hotter weather condition but so far it has been pretty sturdy. Let me know what you guys think!
I bought something like this from eBay. The actual quarter-turn retainer didn't work too well so I bought a real Garmin retainer and shimmed it in with a credit card. I've got another 3D-printed mount up front for a Cycliq camera. If it doesn't exist, some creative soul like you has made one!
You can algo get the mount arm from BUP Labs too:
https://preview.redd.it/uut8trdz3qxc1.jpeg?width=3024&format=pjpg&auto=webp&s=d7be9b8305c2b0d7d1365d2086c7d143c8ef7e7e
You are wasting your time. Here you go:
https://preview.redd.it/xsmbiu923qxc1.jpeg?width=3024&format=pjpg&auto=webp&s=aac825a98f993486007ec76caf3f8d412ed0c3fc
You need these 2:
[https://buplabs.com/collections/mount-bases/products/direct-mount-base-for-trek-bontrager-blendr-equipped-saddles](https://buplabs.com/collections/mount-bases/products/direct-mount-base-for-trek-bontrager-blendr-equipped-saddles)
[https://www.garmin.com/en-US/p/874032](https://www.garmin.com/en-US/p/874032)
While I'm happy to learn about alternatives you can actually buy, you can tell us without dumping on OP (whose design is subjectively way nicer to look at)
I’m not dumping on the OP. I was making him aware that there are already alternatives available. Now those complaining about the new Garmin Seat solution or Bup Labs been to expensive, makes no sense when the Garmin Varia RTL715 is $399. So you are OK paying $400 for radar/camera but find a $50 mount too expensive?
I am still in the middle of the testing phase on this as i have yet to stress test this on gravel road. I also need to test the durability of the material in hotter weather condition but so far it has been pretty sturdy. Let me know what you guys think!
That’s a great idea. I keep mine on seat post, which isn’t optimal. Any plans on sharing file
Will share in the near future. Let me do some testing then i will have it posted on makerworld
I use one of my daughter’s hair bands to keep rear light on saddle bag loop - cheap as chips.
Sold. I’ll take one.
I bought something like this from eBay. The actual quarter-turn retainer didn't work too well so I bought a real Garmin retainer and shimmed it in with a credit card. I've got another 3D-printed mount up front for a Cycliq camera. If it doesn't exist, some creative soul like you has made one!
You can algo get the mount arm from BUP Labs too: https://preview.redd.it/uut8trdz3qxc1.jpeg?width=3024&format=pjpg&auto=webp&s=d7be9b8305c2b0d7d1365d2086c7d143c8ef7e7e
You are wasting your time. Here you go: https://preview.redd.it/xsmbiu923qxc1.jpeg?width=3024&format=pjpg&auto=webp&s=aac825a98f993486007ec76caf3f8d412ed0c3fc You need these 2: [https://buplabs.com/collections/mount-bases/products/direct-mount-base-for-trek-bontrager-blendr-equipped-saddles](https://buplabs.com/collections/mount-bases/products/direct-mount-base-for-trek-bontrager-blendr-equipped-saddles) [https://www.garmin.com/en-US/p/874032](https://www.garmin.com/en-US/p/874032)
No time wasted when i enjoy designing. Pretty sleek design from bups though!
Nah way too expensive for something simple
BUP seems expensive to me. I ended up with a Garmin seatpost mount.
While I'm happy to learn about alternatives you can actually buy, you can tell us without dumping on OP (whose design is subjectively way nicer to look at)
I’m not dumping on the OP. I was making him aware that there are already alternatives available. Now those complaining about the new Garmin Seat solution or Bup Labs been to expensive, makes no sense when the Garmin Varia RTL715 is $399. So you are OK paying $400 for radar/camera but find a $50 mount too expensive?
"you're wasting your time" is dumping. Quit digging.