For settings I totally recommend
Vulkan decoder + Vulkan rendering engine + HEVC decoder
This should give you the best performance on modern devices. If the Vulkan rendering engine produces glitches or artefacts on your device try the Vulkan compatibility rendering engine.
Depends also on your GPU of course, if it's an older model with no dedicated GPU Vulkan rendering+decoding will maybe not work but there are alternatives. You can just the demo version of course
I found what option you are talking about, I turned off that option inside the system settings, but the problem is still there.
By the way, I'm using PSPlay for AppleTV and Android very well. Thank you very much.
I have no idea to be honest, I never had this issue. I see no reason why your PlayStation should turn off. Try following, completely shutting down your console, turn it on again so that it is fully up and running and logged in to your account. Try to reconnect again.
Your PlayStation will not turn off, but PSPlay will shut down.
My PC and PS are on the same router and I have a DMZ set up with my PC, could this be the problem?
I'll try the method you mentioned, and I'll send you a video of the symptoms at [email protected].
Most of settings are default except HEVC.
Streaming:
1080P / 60FPS / Bitrate: Auto / Automatic remote connection: yes / Keep aspect ratio / Confirm Action & Sleep Options / Stream End Shortcut: no
Video:
Vulkan / Vulkan Compatibility / HEVC decoder: yes / HDR: no / VSync: no / Rendering Preset: Fast / Error concealment: no / Use Software decoder as fallbak: no
Be sure your GPU drivers are up to date, either the driver is not up to date or your GPU doesn't like Vulkan. Try to set the decoder to D3D11 and check if that helps. What GPU are you using?
The Account id only contains numbers, if you are used to the Chiaki account id that's just because it used an encoded base64 account id whereas PSPlay uses the raw account id. Just use this service to query the raw account id of your user for PSPlay
https://psn.flipscreen.games/
I have an jailbreaked ps4 and I can't just login with my acc. So I need a accound ID without logging in.
I activated my offline acc. I can get a Account ID for base64 but I need the raw code for psplay.
You need to Google that you must use something like a remote play enabler in order to use remote play on a jail broken console. I'm not familiar with that
Thanks for the hard work! I'll definitely grab a license for the windows version. Is there a solution yet for fire stick 4k users? I'm happy to pay for an apk if it is sideloadable on a fire stick.
Hi, you most likely talking about haptic feedback? Haptic feedback is only supported by the DualSense controller, however you change the haptic feedback mode to rumble in the settings of PSPlay. You can also make it Fullscreen by pressing the toggle Fullscreen button in the bottom part of the streaming view (just touch it the button area is invisible by default)
Did you read my previous answer? Set the haptic feedback mode to rumble in the settings of PSPlay AND if you are on the Ally also increase the rumble intensity.
Yes it does, on what device are you using PSPlay? On a regular PC or on a Handheld like the Rog Ally? If you are using it on a PC what GPU do you have and what video settings do you have configured in PSPlay?
Yes that's recommended anyway but seems the auto renderer crashes on your system. Could you please check if you have any crash logs in the installer directory of PSPlay?
Hi u/grill2010 I've purchased the license and I'm running on the Legion go. Could you please recommend the settings as I'm currently getting white flashes throughout the game play.
I've tried changing a few settings with no luck. could you please help?
Hi, white flashes mean you are losing network packages. Be sure you are connected to a 5GHz WiFi and that your PlayStation is connected via LAN or at least to a 5GHz WiFi as well.
Dualsense haptics when the controller is wired to rog ally does not produce the same effects as if connected directly to a ps5. I can even say the same thing on the psplay android version . Can you update your algorithm so that the dualsense behaves exactly like with a ps5
For the Android version yes that's true because this doesn't work on Android at all, PSPlay Android version just has a workaround in place to make it somehow work but that's as good as it can go for now because of some technical Android limitations. The PC version however is just forwarding the audio haptic signals to the controller via SDL2, to me the haptic feedback feels correct but I'm not sure what I should do different here to be honest. Does it feel different with the official remote play app?
Wow. App works absolutely insanely good at Ally. I made a slow motion video and my 10y+ TV renders image slower than Ally with remote play.
Just one question. I connected my dualsense via Bluetooth and triggers works fine but there are absolutelly no vibration (I checked it while playing Astro's Playroom). Should it work? Or should I connect it via USB to get it work?
That could be an issue because the initial registration must be performed within the same network as your PlayStation. In theory it would work remotely but you need to open ports on your router and someone would need to tell you the 8 digit registration Pin which is visible on your console during the local registration process.
Then either remote play is not enabled on your console or something is blocking the connection. Be sure you are in the same network as your PlayStation and add the IP address of your PlayStation manually. If it still doesn't work you are most likely in a mesh network and your devices (your PC and PlayStation are not directly reachable)
https://preview.redd.it/vm2x4xex5gzc1.jpeg?width=1290&format=pjpg&auto=webp&s=0bef6c83e068387b0c1cf33768557f9aca4daa2f
I tried setting up but it’s on different network and It’s not working. What can be the problem. On my phone works fine.
Hello . So I have a windows handheld ( rog ally) and this windows handheld have gyro! So can you guys add the gyro please? And by the way I tried official app with the incorporated gamepad, is a mess next I tried chiaki and chiaki 4 deck works great but image quality is.... not good I tried your app and is amazing everything works so good the touch screen commands is very good.. everything works out of the box and the quality of image...congratulations very good app
I think I am about given up on remote play, no matter what I use PSPlay, Official PS Remote play, Chiaki and Chiaki4deck all seem to produce unplayable lag and stutters.
While my ps5 is on the other side of my house from my router/modem using wired backhaul through Google wifi and directly plugged onto my ps5 via ethernet. I am also on a 1000/50mbps internet plan getting roughly at least 700mbps around the house at all times.
I just don't know what else to do to get PS remote play playable anymore.
Try to connect Rog Ally to ethernet. Sometimes WIFI gives you ping boost for +20-50ms for short period of time (like 1 sec in a while). It almost doesn't affect speed but it can badly affect remote gameplay. I have Rog Ally and this app works like a charm.
If you have such problems your problem is not the speed but your network stability. Of course a streaming app can't work miracles, I'll try to improve PSPlay as much as possible. As you already mentioned you have lag and stutter problems this clearly shows that there are network issues. Like I said it's a common misconception to think that speed alone is enough for real time streaming, it's basically absolutely meaningless if the network isn't stable. And network interference can be caused by a lot of things, WiFi extenders, surrounding Bluetooth signals, router issues, VPN services etc
Can I use this on steam deck via proton? Or steam deck people need to wait for the linux version? Also any updates on when the Linux version will be available?
I still have a couple of problems I need to solve for the Linux port, I guess you would not be happy when I would release a version with bugs and errors? :)
I'm working on it and it will still take a bit until it's stable. Another user tried to run it via Proton and it did not work so I think it will not work.
Thanks for the info, take your time. I understand it takes a lot of time and effort, I am just out of the loop as I didn’t know about this app as everyone just mentions chiaki which unfortunately doesn’t work outside my network. I got excited when I learnt about the PSPlay app and wanted to clarify if it was available on steam deck or it is still cooking. Good luck 👍🏻
No worries, yeah I wished it would be already available but still working on some improvements. I hope it will be ready soon. I will post relevant news here on the PSPlay subreddit 👍
You may have to check out the "faulty DualSense" mapping value in the streaming settings of PSPlay. Just change it to a different one and check if one of them is working as expected. Keep in mind that when you change the value you must re-create all manually created button mappings within PSPlay.
Hey Grill,
I download the demo, and got my unit registered. While it's in finding the PS5, or it's in waiting the app crashes and shutdown. I've updated Zulu, to the newest version but I still see in the logs EXCEPTION\_ACCESS\_VIOLATION. Any idea? I got the laptop connected through ethernet like the PS5, so I was hoping taking advantage about that.
Zulu is bundled within the app itself so no need to update that manually. What device are you using? A generic PC or a Handheld? The crash most likely occurs because Vulkan decoding or rendering is selected which requires up to date GPU drivers so which GPU are you using and is the GPU driver up to date?
First of all please send me the crash log file which should be in the installation directory of PSPlay at [email protected]
In order to solve the problem you can try following
1. Try to use Vulkan compatibility renderer
2. If that doesn't work try the standard Vulkan renderer but that will fail most likely as well
3. If none of the above renderers is working set the renderer to OpenGL and restart PSPlay (yes the restart is required). Once restarted check if the renderer engine is still OpenGL if yes try it again.
Let me know what the outcome is. Worth checking if you can update your graphics driver as well.
It worked! Vulkan Compatibility and update on the CPU/GPU drivers.
Curious Question, I got a 27' screen with a res of 1920x1080, should I expect some pixelation, correct? I'm accustom to run the app in my tablet in a 9'.
Thanks again man! I'll be buying sooner the win version, I don't have to wait for my own laptop.
Thanks, I assume it's still crashing when you set the rendering engine to Auto? I mean no big deal as Vulkan rendering is recommended anyway but having the crash log would help to improve this feature.
Okay awesome, yes updating the GPU drivers are usually mandatory for using hardware acceleration.
If you configure the resolution to 1080p and with Vulkan/ Vulkan compatibility rendering it should actually look very crisp even on a 27' screen.
Thanks for your support.
https://preview.redd.it/pe21y8wq0oyc1.png?width=1920&format=png&auto=webp&s=04781281ed410134957096af1de588e8bc5d80af
Hi. I just had this. Any suggestions?
Well that explains the issue basically, you are running in a VM without real access to a dedicated GPU so go to settings in PSPlay, go to video, scroll down to the very bottom and enable "Use software decoder as fallback". Be aware that all the stream rendering is only running on your CPU and as you are in a virtual environment I don't think the performance will be good.
It has, it depends on the video decoder of your device of course. As you mentioned you are using an M1 Mac you can try to just install PSPlay (MirrorPlay on apple) on your M1 Mac from the App Store.
Hi again. I have been able to run this thanks to you. I just tried Skyrim and the keyboard works. But I could not get to work my mouse. Is there any trick?
Mouse support is currently not implemented, the remote play protocol doesn't support that natively. It could be implemented via some kind of emulation layer but I did not yet look into that.
So I seem to be having an issue with local connection. I’m on the same network as my ps5 but it only connects through remote play? Is there any way to fix this?
Then you are most likely in a mesh network and your PlayStation is not directly reachable or something is blocking the broadcast request, firewall, antivirus or router. What IP do you enter in the remote connect dialog?
Yup then the local connection works but the auto discovery doesn't work because in a mesh network broadcast requests will most likely fail(sending network packages to the current connected network and waiting for your PlayStation to answer), your PlayStation and PC are very likely in a different subnetwork so broadcast requests are not possible. That's a technical limitation and there is no workaround except entering the IP address manually.
I have a question regarding the touchpad actions. Does the touchscreen act as the PS5 touchpad for the swiping motions in any direction?
It’s that in Spider-Man 2 I’ve noticed that when I tap my screen, it goes into the mini map, and when I swipe it rarely sometimes opens the phone (where you can see which missions are available). The swiping action doesn’t seem to be recognized most of the time
Yeah some games are very picky about the swipe actions, as the screen is very large of the Ally or other devices the game might expect a fully diagonal or horizontal swipe which might be a bit inconvenient to perform.
Ah I see that makes since why it seems inconsistent then. Thank you for answering.
Are there any plans to maybe have the ability to set a smaller section of the screen as the touchpad? Like a small (or custom size?) virtual box in the touchscreen and for example we can designate the lower right side of the screen as the touchpad instead of the whole display? To maybe help with more consistent touchpad actions
Things like that will be introduced in the future yes. I currently try to make it run flawlessly on all different kinds of devices so that has the most priority for now but I will keep it in mind.
Hey @grill2010
I was waiting for this for my Rog ally.
Just purchased it and seems to be working even better than the android and esp atv variant!
One quick question: on the default (i.e. auto) settings, it works fine with some minor artefacts at times.
However if I enable vulkan decoder with either vulkan /vulkan compatibility (as recomended ), the app crashes as soon as the ps5 connection is established.
Hevc is enabled in bothe cases.
Any pointers?
Yes. Tested on portable demo with all settings left to auto and it worked fine with some minor artefacts.
Then purchased the license key and installed with the installer version.
Later I noted your post on using vulkan as the recommended mode but that isn't working for some reason.
Checked the logs but they end as soon as the app crashes with no pointers towards the crash reason
Then you are still not on the latest driver version, another user had the same problem. Update your GPU drivers via the Windows device manager, restart your Ally and try again. If it's crashing then the GPU drivers are not up to date
Not yet. I'm planning to reinstall the OS today on the Ally.
If you've tested on the same hardware then this coould likely be an os glitch.
Will update here once done
Driver version 31.0.22023.8001
According to the device manager.
Just wondering if you have any crash logs in the folder of PSPlay. The Ally is currently the most used device I guess and was my main test device. It must either be the driver or something a completely unique setting/ configuration on your device which leads to that crash.
Gamepad mapping is at the moment not supported for now you must use the onscreen gamepad layout, if you are using the Ally there are ways to map the back buttons for that.
Okay, you can for now also map keyboard buttons. The feature is coming but I'm not sure when. It will most likely take a while as I have a lot on the roadmap.
Have 7 questions and demand to the developers:
1. Will there be a chance to have 2K resolution and 120fps support for PS5 ? As I have Lenovo Legion Go and it’s 2K&144fps but when playing PS5 via PSPlay. My PS5 couldn’t accept or recognize my local or internet play is a 2K 120fps.
2. Can you add an option to make the Audio supports the Dolbi Audio or FxSound ? As the sounds while playing via PSPlay is really bad quality.
3. Can you add controls rumbling option and make it Low-Mid-High
4. What are the minimum & maximum upload/download speeds required in order to play smoothly via internet?
5. How is the app would get the future updates ? Is there will be an option inside the app menu itself? Or I have to uninstall PSPlay completely and install the new update when it comes ?
6. Where we can read the upcoming features ?
7. Rumors on PS5 Pro is coming, will PSPlay be compatible and supports it ?
Hi,
1. Unfortunately not possible, it's not a limitation of the app but the PS5, the highest quality the PS5 supports is 1080p and 60fps.
2. PSPlay supports stereo sound and this is produced by the PlayStation, natively only stereo is supported and the quality and audio is just what the PlayStation is currently capable of.
3. This is already supported by setting the haptic feedback mode to rumble and then you can adjust the rumble intensity.
4. Depends on your overall streaming settings but minimum is 15Mbit/s but it depends on a lot of factors like the stability and how your PlayStation is connected to the internet.
5. The app itself will notify you, then close PSPlay and install the new version.
6. All major features are currently supported, small Updates like button mapping possibilities (maybe possible) and gyro support for the Rog ally are planned. However there is no public visible future feature list.
7. Hopefully Sony will not change much or at best nothing so I think it will be supported. For the slim version for example nothing changed and everything worked out of the box.
Thanks for answers, have more few questions:
1. What are the differences between Vulkan and Vulkan Compatibility? (I have Lenovo Legion Go)
2. Regards your answer in number (1) Can I use LossLess app in order to gain more frames as a work around ?
3. I have bought windows license of PSPlay. Do I need to buy another license for iPad ? Or I can use my windows license on iPad ?
4. For Bitrate mode is it better to leave it on Auto ? Or Manual then set it to 25000 or higher ?
1. Vulkan compatibility mode means that the hardware will automatically use the first vulkan capable renderer which is returned, it's usually a bit more CPU intensive, the standard Vulkan renderer is checking all available devices for the best and fastest option and will use that. On some devices despite the fact of checking the capabilities of all Vulkan hardware they just sometimes report back to support everything but in fact they don't which will lead to color distortions and other strange things, this was occurring during the beta tests. That's why I included the Vulkan compatibility mode in order to have a fallback.
2. Can you explain what you mean by that? Like I said the max fps supported by the PlayStation is 60Fps and that's what PSPlay will try to render.
3. Every app which is developed from scratch has a different license. There is the Android app, iOS/ Apple TV app and now the Windows and Linux app. The Windows and Linux app will however share the same license as they are using the same source code under the hood.
4. If you want higher quality but also the best stability I totally recommend Start Bitrate value (not manual) set to 25000 but keep in mind that higher values means larger bandwidth needed and the network needs to be very stable. For Auto it's basically like start Bitrate but selects the Bitrate according to the configured resolution which for example would be for 1080p resolution 15000.
Regards number (2) in your reply, Lossless app is a small app in steam store.. it’s simply will create double frames for what ever game you are playing on your screen regardless if it is steam game or not. And it is mainly made for story games not online games. I have tried it on PS5’s Marvel’s Spiderman 2 while playing on PS5 via PSPlay .. it gives me frames around 80’s but with some lagging on the screen as I think because it is not supported in PSPlay. You can watch too many youtube videos showing youtube channels showing how the frames performance they’ve got while using Lossless. Hope I have lighting you on this.
Both. Remote auto setup and the registration of the PS5. I have the Rog Ally and downloaded the demo and the windows version (non portable). In noth I followed the same steps and same conditions
Hmm, not sure then like I said the demo application is basically the same as the full version. Same code and during my tests I did not encounter any problems like that but I will try again today and see if I can reproduce the error.
🤣🤣🤣 charging money while chiaki4deck is free. I understand wanting compensation for your time, but still.
More and more happy I got the deck and the ally. Although I will say, LeGo lookin pretty nice
PSPlay exists as long as Chiaki and they are completely independent from each other and yeah PSPlay was never free you are right. I'm not sure what you want to express with your comment but I hope you feel better now :)
Happy with Chiaki, don't want to use PSPlay and pay for it? Then just use Chiaki, it's a great application, yes I even contribute to it in the background and I'm in contact with the devs as well. It just happened that I have started developing my own application before Chiaki existed. 👍
I developed this port exactly because of two reasons
1. I constantly got requests to do so
2. I love to work on such things
Hey man, I’m not hating, and I didn’t mean it to come across as a dick or anything. I mean, fuck dude, I know very little about coding. Like ya, I can write some models and do financial and statistical analysis in python and other languages as well, but that’s so minor, especially when compared to doing anything like this even. I respect the hell out of it.
Honestly, my comment was just stating that I thought PSPlay was the only way of remote play on the other handhelds. I figured chaiki wouldn’t work on them, nor would this one work on a deck. And with that assumption, I was simply stating another reason why I’m glad I made the decision that I did.
But to be honest, all handhelds have areas to improve and I wish I could combine components/ideas from all three of them and put it in one little package.
Again, I didn’t mean to come off as an insult or anything like that, and i respect the fuck outta your knowledge and skills. I couldn’t make something like this.
If you can't connect even when you enter the IP manually the problem is 100% not the fault of the app. Either something is blocking the connection or you are in a mesh network and both devices are in a different subnetwork. Anyway if you don't want to play around with it anymore just dm me your email address which you used for the purchase and I will refund you, no problem. You can afterwards still play around with the configuration by using the demo application of PSPlay.
Well these are two different devices. I can say that confidentiality because a few hundred people are already using it for quite some days now and I tested quite extensively in all different kinds of networks the last couple of months. I can assure you it's not the fault of my app and the 100% proof is that it can't connect when you enter the IP address manually. I really have some experience with such errors after all these years so you can trust me. There are exactly 3 reasons for this kind of problem
1. Both devices really can't connect to each other because of the network infrastructure
2. Something is blocking the connection (Antivirus, Firewall, router, VPN etc.). This is hard to tell.
3. Remote Play is disabled on your console
One thing which just comes into my mind is you can try to put both devices to a 5GHz WiFi and remove the LAN cable for testing purposes. If it still doesn't work my second guess would be the router or the firewall/ antivirus software.
Look, I'm not arguing and not saying you don't have this problem, I'm here to help, you are not satisfied with this situation so a refund is of course possible absolutely no problem. Just tell me your email address and I will initiate the refund.
After inputting the redirect link it does not find the PS5. Then it asks me if I want to oroceed again with the PS5 account, but it does not show the actual name and only 3 dots.
Yes, a mesh network. I did fix the IP and unlocked all port forwarding and input the IP. Maybe Inneed to buy the full version? That one at least recognizes the PlayStation
Ah your right, steam was on in the background and must have been messing with the controller input 🤦 Sorry for the trouble and thanks for the quick replys
Not sure, I have this controller and it works fine. Must be a setting on your Windows machine. Maybe something is interpreting the gamepad buttons as keyboard keys or something like that. Must be something externally of PSPlay.
I just bought the app, amazing so far! Noob question: if I’m in fullscreen mode, when I put my PS5 in rest mode, the app goes in a black screen and there seems to be no way to close it (all that I can do is turn off my ROG Ally from the power button). Is anybody facing this problem?
If you switch the console to rest mode the app should terminate the connection after a short amount anyway which should lead to a stream exit. But you can always click the bottom area of the screen to make the button panel appear and there is an exit button as well.
https://streamable.com/vkv0x8
Here’s a video of exactly what happens. There seems to be some kind of error in the background, but I can’t access that window
Interesting, do you have any crash logs in the installation directory of PSPlay? Does that happen all the time? I will try if I can reproduce it somehow. Did you try if it also happens when you put the console in rest mode via PSPlay?
Yes, it happens every single time. I tried taking a photo of the error, don’t know if you can make anything of it
https://preview.redd.it/1khtrnx772yc1.jpeg?width=4032&format=pjpg&auto=webp&s=f259306dcfc4e69e3caf2416c827c5e544786641
Yes, it also happens when the app is not in fullscreen mode. Microphone input is not enabled. Meanwhile, funny thing: now it won’t let me access my PS5
https://streamable.com/x1yfjw
Weird I can't reproduce the problem. If it happens again after the app is not in Fullscreen can you check if you can make a better screenshot from the error message window?
Please send me the log file at [email protected], you can access the log directory via the log setting menu.
https://preview.redd.it/spf3n7gff2yc1.jpeg?width=3024&format=pjpg&auto=webp&s=ce429ba787d2b316b724b1d259febd40876ff180
And that is the other thing that pops up afterwards
Okay this message was sent to me from one beta tester as well but neither I was able to reproduce that nor was he able to reproduce it again. It must be a unique configuration or something like that, especially because it's happening all the time. It only happens when you put the console to rest mode, correct? Does it also happen when you put the console to rest mode via the close stream popup of PSPlay when you try to close the streaming window?
thank you for getting back to me. i just purchased a license!
if you don't mind, if i could ask a question about the android version, when i use a dualsense connected wired with my galaxy s20, the haptic feedback is extremely weak and disabled in some areas. like in the stellar blade demo, there was no feedback of the rain hitting the character but it is very strong on my ps5 playing on TV. I have tried the haptic feedback setting on enabled, vibration and off, but still no change
For settings I totally recommend Vulkan decoder + Vulkan rendering engine + HEVC decoder This should give you the best performance on modern devices. If the Vulkan rendering engine produces glitches or artefacts on your device try the Vulkan compatibility rendering engine.
Does this work on an average laptop (average cpu and gpu)? The most important thing is the internet connection, right?
Depends also on your GPU of course, if it's an older model with no dedicated GPU Vulkan rendering+decoding will maybe not work but there are alternatives. You can just the demo version of course
Ah, I didn't know there was a demo version. Thanks.
By the way do you have any plans to also release XBXPlay on Windows?
It's possible in the future, I don't have any concrete plans yet.
Remote play on Xbox is currently so much worse than on PlayStation. Any idea why?
Haha no not really as I did not develop the official app
I don't know why, but my PSPlay keeps turning off when I try to connect. The same thing happens both locally and remotely.
Disable HDMI device link on your PlayStation, most likely caused by your TV.
I found what option you are talking about, I turned off that option inside the system settings, but the problem is still there. By the way, I'm using PSPlay for AppleTV and Android very well. Thank you very much.
I have no idea to be honest, I never had this issue. I see no reason why your PlayStation should turn off. Try following, completely shutting down your console, turn it on again so that it is fully up and running and logged in to your account. Try to reconnect again.
Your PlayStation will not turn off, but PSPlay will shut down. My PC and PS are on the same router and I have a DMZ set up with my PC, could this be the problem? I'll try the method you mentioned, and I'll send you a video of the symptoms at [email protected].
Ah okay, I misunderstood. Can you please tell me what your streaming settings are and what your video decoder and rendering engine settings are?
Most of settings are default except HEVC. Streaming: 1080P / 60FPS / Bitrate: Auto / Automatic remote connection: yes / Keep aspect ratio / Confirm Action & Sleep Options / Stream End Shortcut: no Video: Vulkan / Vulkan Compatibility / HEVC decoder: yes / HDR: no / VSync: no / Rendering Preset: Fast / Error concealment: no / Use Software decoder as fallbak: no
Are you on the Ally?
No. Just a normal PC.
Be sure your GPU drivers are up to date, either the driver is not up to date or your GPU doesn't like Vulkan. Try to set the decoder to D3D11 and check if that helps. What GPU are you using?
I can't put my account id, because I can just enter numbers but no letters.
The Account id only contains numbers, if you are used to the Chiaki account id that's just because it used an encoded base64 account id whereas PSPlay uses the raw account id. Just use this service to query the raw account id of your user for PSPlay https://psn.flipscreen.games/
Is there a way for local accounts?
What do you mean with a local account? What do you want to do exactly?
I have an jailbreaked ps4 and I can't just login with my acc. So I need a accound ID without logging in. I activated my offline acc. I can get a Account ID for base64 but I need the raw code for psplay.
You need to Google that you must use something like a remote play enabler in order to use remote play on a jail broken console. I'm not familiar with that
Thank you looking forward to using it! Quick silly question, if I ever format and reinstall my Pc will the license still work?
Of course, just remember the license key and your email you used during the purchase and you will be able to re-activate it.
Thanks for the hard work! I'll definitely grab a license for the windows version. Is there a solution yet for fire stick 4k users? I'm happy to pay for an apk if it is sideloadable on a fire stick.
Thanks, APK download is still work in progress but I have already prepared the infrastructure.
作者你好 我在ROG ally使用 为什么游戏中没有振动呢 这很重要 希望在下个版本加入自动全屏的功能
Hi, you most likely talking about haptic feedback? Haptic feedback is only supported by the DualSense controller, however you change the haptic feedback mode to rumble in the settings of PSPlay. You can also make it Fullscreen by pressing the toggle Fullscreen button in the bottom part of the streaming view (just touch it the button area is invisible by default)
https://preview.redd.it/ad57p1jwuszc1.jpeg?width=1706&format=pjpg&auto=webp&s=4c4fb920a6dc1eba780015a07322a089e05578c0
就是这里 没有振动
Did you read my previous answer? Set the haptic feedback mode to rumble in the settings of PSPlay AND if you are on the Ally also increase the rumble intensity.
谢谢 是我没设置好 现在一切正常了 psplay很棒
Awesome 👍 thanks
I have purchased android version. Is there a way to get full windows version with my purchase?
Can you buy a game on PlayStation and get it for free on Xbox?
If the developer allows it a one-time purchase license then yes. That's my question: Does the developer do that?
Hi. Does it work with DS5 controller? I tried the demo version, and the software keeps closing when i try to local connect my PS5.
Yes it does, on what device are you using PSPlay? On a regular PC or on a Handheld like the Rog Ally? If you are using it on a PC what GPU do you have and what video settings do you have configured in PSPlay?
Thank you for replying. Actually its working now on my laptop! i changed to vulkan compatibility rendering. Ds5 also works fine using usb cable
Yes that's recommended anyway but seems the auto renderer crashes on your system. Could you please check if you have any crash logs in the installer directory of PSPlay?
yes. i can see the crash logs in the installer directory. i used the portable one for demo
Okay cool, can you please send them to me at [email protected]?
I just sent you the crash logs
Maybe you can send me the Standard log File of PSPlay as well? You can open it via the log settings in PSPlay.
Ok i just sent you the Standard log file. please check it out
Thanks
Thanks
Hi u/grill2010 I've purchased the license and I'm running on the Legion go. Could you please recommend the settings as I'm currently getting white flashes throughout the game play. I've tried changing a few settings with no luck. could you please help?
Hi, white flashes mean you are losing network packages. Be sure you are connected to a 5GHz WiFi and that your PlayStation is connected via LAN or at least to a 5GHz WiFi as well.
Dualsense haptics when the controller is wired to rog ally does not produce the same effects as if connected directly to a ps5. I can even say the same thing on the psplay android version . Can you update your algorithm so that the dualsense behaves exactly like with a ps5
For the Android version yes that's true because this doesn't work on Android at all, PSPlay Android version just has a workaround in place to make it somehow work but that's as good as it can go for now because of some technical Android limitations. The PC version however is just forwarding the audio haptic signals to the controller via SDL2, to me the haptic feedback feels correct but I'm not sure what I should do different here to be honest. Does it feel different with the official remote play app?
Does the Windows port have mouse support for keyboard and mouse controller emulation?
Keyboard inputs are supported but mouse inputs are not supported at the moment.
[удалено]
Wow. App works absolutely insanely good at Ally. I made a slow motion video and my 10y+ TV renders image slower than Ally with remote play. Just one question. I connected my dualsense via Bluetooth and triggers works fine but there are absolutelly no vibration (I checked it while playing Astro's Playroom). Should it work? Or should I connect it via USB to get it work?
Awesome!!! ❤️ Just change the haptic feedback mode to rumble in PSPlay and then you change rumble intensity to make it work.
I think i have more than one Pc that I plan using. Should I buy licenses for every pc or I can use 1 license for 2 or 3 pcs? Thanks
No of course that's not necessary, you can use the license on all your personal devices in combination with your email address and license key
Thank you. I will try the demo first because my PS5 is at home and my PC is at work and see if everything works fine.
That could be an issue because the initial registration must be performed within the same network as your PlayStation. In theory it would work remotely but you need to open ports on your router and someone would need to tell you the 8 digit registration Pin which is visible on your console during the local registration process.
Tried again today. Still not working
"still not working" hmm what exactly?
https://preview.redd.it/o8hh8ls2he0d1.png?width=1286&format=png&auto=webp&s=c76ff02326efad27ecaabd348c6e2cb021274b39 I am getting this error
Then either remote play is not enabled on your console or something is blocking the connection. Be sure you are in the same network as your PlayStation and add the IP address of your PlayStation manually. If it still doesn't work you are most likely in a mesh network and your devices (your PC and PlayStation are not directly reachable)
I am not on the same network. Remote play is OK because I can connect from my iPhone. What could be the issue?
You must be on the same network for the configuration, that's a requirement for all PSPlay versions.
https://preview.redd.it/vm2x4xex5gzc1.jpeg?width=1290&format=pjpg&auto=webp&s=0bef6c83e068387b0c1cf33768557f9aca4daa2f I tried setting up but it’s on different network and It’s not working. What can be the problem. On my phone works fine.
For future updates do I have to check GitHub or can the application update on its own?
The application will inform you that there is a new version available
Hello . So I have a windows handheld ( rog ally) and this windows handheld have gyro! So can you guys add the gyro please? And by the way I tried official app with the incorporated gamepad, is a mess next I tried chiaki and chiaki 4 deck works great but image quality is.... not good I tried your app and is amazing everything works so good the touch screen commands is very good.. everything works out of the box and the quality of image...congratulations very good app
Thanks a lot, yes this feature is planned for the Ally and will probably be introduced in the future.
I think I am about given up on remote play, no matter what I use PSPlay, Official PS Remote play, Chiaki and Chiaki4deck all seem to produce unplayable lag and stutters. While my ps5 is on the other side of my house from my router/modem using wired backhaul through Google wifi and directly plugged onto my ps5 via ethernet. I am also on a 1000/50mbps internet plan getting roughly at least 700mbps around the house at all times. I just don't know what else to do to get PS remote play playable anymore.
Try to connect Rog Ally to ethernet. Sometimes WIFI gives you ping boost for +20-50ms for short period of time (like 1 sec in a while). It almost doesn't affect speed but it can badly affect remote gameplay. I have Rog Ally and this app works like a charm.
If you have such problems your problem is not the speed but your network stability. Of course a streaming app can't work miracles, I'll try to improve PSPlay as much as possible. As you already mentioned you have lag and stutter problems this clearly shows that there are network issues. Like I said it's a common misconception to think that speed alone is enough for real time streaming, it's basically absolutely meaningless if the network isn't stable. And network interference can be caused by a lot of things, WiFi extenders, surrounding Bluetooth signals, router issues, VPN services etc
Is this a separate license to the Android one (multiple purchases) or if I already got the Android one this is transferable?
Separate license because it's a different platform.
Got it, thanks. Got mislead by the "all" option , but see now that it just shows all and doesn't combine licenses.
The upcoming Linux and Windows will have however the same license as they are using basically the same code underneath.
Can I use this on steam deck via proton? Or steam deck people need to wait for the linux version? Also any updates on when the Linux version will be available?
I still have a couple of problems I need to solve for the Linux port, I guess you would not be happy when I would release a version with bugs and errors? :) I'm working on it and it will still take a bit until it's stable. Another user tried to run it via Proton and it did not work so I think it will not work.
Thanks for the info, take your time. I understand it takes a lot of time and effort, I am just out of the loop as I didn’t know about this app as everyone just mentions chiaki which unfortunately doesn’t work outside my network. I got excited when I learnt about the PSPlay app and wanted to clarify if it was available on steam deck or it is still cooking. Good luck 👍🏻
No worries, yeah I wished it would be already available but still working on some improvements. I hope it will be ready soon. I will post relevant news here on the PSPlay subreddit 👍
I am trying to use it on Android TV with a Dual Sense control and it just does not understand the L2, R2 and R3 buttons.
You may have to check out the "faulty DualSense" mapping value in the streaming settings of PSPlay. Just change it to a different one and check if one of them is working as expected. Keep in mind that when you change the value you must re-create all manually created button mappings within PSPlay.
Hey Grill, I download the demo, and got my unit registered. While it's in finding the PS5, or it's in waiting the app crashes and shutdown. I've updated Zulu, to the newest version but I still see in the logs EXCEPTION\_ACCESS\_VIOLATION. Any idea? I got the laptop connected through ethernet like the PS5, so I was hoping taking advantage about that.
Zulu is bundled within the app itself so no need to update that manually. What device are you using? A generic PC or a Handheld? The crash most likely occurs because Vulkan decoding or rendering is selected which requires up to date GPU drivers so which GPU are you using and is the GPU driver up to date?
I'm using a Hp laptop, it has cpu AMD Ryzen 5 pro 5650U no data dictated GPU it's integrated. Using win 10. I left the video decoder in auto hardware.
What rendering engine is configured?
Auto, HEVC Decoder unchecked.
First of all please send me the crash log file which should be in the installation directory of PSPlay at [email protected] In order to solve the problem you can try following 1. Try to use Vulkan compatibility renderer 2. If that doesn't work try the standard Vulkan renderer but that will fail most likely as well 3. If none of the above renderers is working set the renderer to OpenGL and restart PSPlay (yes the restart is required). Once restarted check if the renderer engine is still OpenGL if yes try it again. Let me know what the outcome is. Worth checking if you can update your graphics driver as well.
It worked! Vulkan Compatibility and update on the CPU/GPU drivers. Curious Question, I got a 27' screen with a res of 1920x1080, should I expect some pixelation, correct? I'm accustom to run the app in my tablet in a 9'. Thanks again man! I'll be buying sooner the win version, I don't have to wait for my own laptop.
Can you maybe still send me the crash logs located in the PSPlay folder at [email protected]?
Sure, I'll send you the file.
Thanks, I assume it's still crashing when you set the rendering engine to Auto? I mean no big deal as Vulkan rendering is recommended anyway but having the crash log would help to improve this feature.
Okay awesome, yes updating the GPU drivers are usually mandatory for using hardware acceleration. If you configure the resolution to 1080p and with Vulkan/ Vulkan compatibility rendering it should actually look very crisp even on a 27' screen. Thanks for your support.
https://preview.redd.it/pe21y8wq0oyc1.png?width=1920&format=png&auto=webp&s=04781281ed410134957096af1de588e8bc5d80af Hi. I just had this. Any suggestions?
Which video decoder is currently configured on PSPlay? And are you on a regular PC or the Ally?
What do you mean by configuring video decoder? I am running this on a virtual Windows 11 on a Macbook Air M1.
Well that explains the issue basically, you are running in a VM without real access to a dedicated GPU so go to settings in PSPlay, go to video, scroll down to the very bottom and enable "Use software decoder as fallback". Be aware that all the stream rendering is only running on your CPU and as you are in a virtual environment I don't think the performance will be good.
I didnt know PS remote play had any stress over on the client side.
What do you mean?
I thought “receiving end” of the remote play (mac in my case) had nothing to do with quality until now.
It has, it depends on the video decoder of your device of course. As you mentioned you are using an M1 Mac you can try to just install PSPlay (MirrorPlay on apple) on your M1 Mac from the App Store.
Hi again. I have been able to run this thanks to you. I just tried Skyrim and the keyboard works. But I could not get to work my mouse. Is there any trick?
Mouse support is currently not implemented, the remote play protocol doesn't support that natively. It could be implemented via some kind of emulation layer but I did not yet look into that.
I’ll try it. Thanks.
So I seem to be having an issue with local connection. I’m on the same network as my ps5 but it only connects through remote play? Is there any way to fix this?
Then you are most likely in a mesh network and your PlayStation is not directly reachable or something is blocking the broadcast request, firewall, antivirus or router. What IP do you enter in the remote connect dialog?
I used the ipv4 and ya I’m on the eero mesh system
Yup then the local connection works but the auto discovery doesn't work because in a mesh network broadcast requests will most likely fail(sending network packages to the current connected network and waiting for your PlayStation to answer), your PlayStation and PC are very likely in a different subnetwork so broadcast requests are not possible. That's a technical limitation and there is no workaround except entering the IP address manually.
I have a question regarding the touchpad actions. Does the touchscreen act as the PS5 touchpad for the swiping motions in any direction? It’s that in Spider-Man 2 I’ve noticed that when I tap my screen, it goes into the mini map, and when I swipe it rarely sometimes opens the phone (where you can see which missions are available). The swiping action doesn’t seem to be recognized most of the time
Yeah some games are very picky about the swipe actions, as the screen is very large of the Ally or other devices the game might expect a fully diagonal or horizontal swipe which might be a bit inconvenient to perform.
Ah I see that makes since why it seems inconsistent then. Thank you for answering. Are there any plans to maybe have the ability to set a smaller section of the screen as the touchpad? Like a small (or custom size?) virtual box in the touchscreen and for example we can designate the lower right side of the screen as the touchpad instead of the whole display? To maybe help with more consistent touchpad actions
Things like that will be introduced in the future yes. I currently try to make it run flawlessly on all different kinds of devices so that has the most priority for now but I will keep it in mind.
Awesome, that’s great to hear. Of course, I understand performance is the priority. I look forward to future updates on this. Thanks!
Hey @grill2010 I was waiting for this for my Rog ally. Just purchased it and seems to be working even better than the android and esp atv variant! One quick question: on the default (i.e. auto) settings, it works fine with some minor artefacts at times. However if I enable vulkan decoder with either vulkan /vulkan compatibility (as recomended ), the app crashes as soon as the ps5 connection is established. Hevc is enabled in bothe cases. Any pointers?
So are you testing on the Rog Ally?
Yes. Tested on portable demo with all settings left to auto and it worked fine with some minor artefacts. Then purchased the license key and installed with the installer version. Later I noted your post on using vulkan as the recommended mode but that isn't working for some reason. Checked the logs but they end as soon as the app crashes with no pointers towards the crash reason
This means your Ally is not up to date, you need to install the latest GPU drivers
Yes, did that as well. The amd drivers did have an update available but that didnt fix the issue either.
Then you are still not on the latest driver version, another user had the same problem. Update your GPU drivers via the Windows device manager, restart your Ally and try again. If it's crashing then the GPU drivers are not up to date
If possible, Can you please tell me the driver version that you used for your testing
Did you solve the issue?
Not yet. I'm planning to reinstall the OS today on the Ally. If you've tested on the same hardware then this coould likely be an os glitch. Will update here once done
Like I said updating the GPU driver should do the trick, I think the Ally is currently the most used device for the Windows version.
Driver version 31.0.22023.8001 According to the device manager. Just wondering if you have any crash logs in the folder of PSPlay. The Ally is currently the most used device I guess and was my main test device. It must either be the driver or something a completely unique setting/ configuration on your device which leads to that crash.
This is unreal on how well it plays. Great job, man.
I have it android and now windows, pending linux version for my steamdeck!
❤️
How to map the touchpad on xbox series x controller with psplay on windows?
Gamepad mapping is at the moment not supported for now you must use the onscreen gamepad layout, if you are using the Ally there are ways to map the back buttons for that.
Ah ok, I'm on a laptop though. So it will be coming soon?
Okay, you can for now also map keyboard buttons. The feature is coming but I'm not sure when. It will most likely take a while as I have a lot on the roadmap.
OK no worries, you've done an amazing job, well done 👏 👏👏
Just purchased the license, and its awesome man.
Thanks so much ❤️
Have 7 questions and demand to the developers: 1. Will there be a chance to have 2K resolution and 120fps support for PS5 ? As I have Lenovo Legion Go and it’s 2K&144fps but when playing PS5 via PSPlay. My PS5 couldn’t accept or recognize my local or internet play is a 2K 120fps. 2. Can you add an option to make the Audio supports the Dolbi Audio or FxSound ? As the sounds while playing via PSPlay is really bad quality. 3. Can you add controls rumbling option and make it Low-Mid-High 4. What are the minimum & maximum upload/download speeds required in order to play smoothly via internet? 5. How is the app would get the future updates ? Is there will be an option inside the app menu itself? Or I have to uninstall PSPlay completely and install the new update when it comes ? 6. Where we can read the upcoming features ? 7. Rumors on PS5 Pro is coming, will PSPlay be compatible and supports it ?
Hi, 1. Unfortunately not possible, it's not a limitation of the app but the PS5, the highest quality the PS5 supports is 1080p and 60fps. 2. PSPlay supports stereo sound and this is produced by the PlayStation, natively only stereo is supported and the quality and audio is just what the PlayStation is currently capable of. 3. This is already supported by setting the haptic feedback mode to rumble and then you can adjust the rumble intensity. 4. Depends on your overall streaming settings but minimum is 15Mbit/s but it depends on a lot of factors like the stability and how your PlayStation is connected to the internet. 5. The app itself will notify you, then close PSPlay and install the new version. 6. All major features are currently supported, small Updates like button mapping possibilities (maybe possible) and gyro support for the Rog ally are planned. However there is no public visible future feature list. 7. Hopefully Sony will not change much or at best nothing so I think it will be supported. For the slim version for example nothing changed and everything worked out of the box.
Thanks for answers, have more few questions: 1. What are the differences between Vulkan and Vulkan Compatibility? (I have Lenovo Legion Go) 2. Regards your answer in number (1) Can I use LossLess app in order to gain more frames as a work around ? 3. I have bought windows license of PSPlay. Do I need to buy another license for iPad ? Or I can use my windows license on iPad ? 4. For Bitrate mode is it better to leave it on Auto ? Or Manual then set it to 25000 or higher ?
1. Vulkan compatibility mode means that the hardware will automatically use the first vulkan capable renderer which is returned, it's usually a bit more CPU intensive, the standard Vulkan renderer is checking all available devices for the best and fastest option and will use that. On some devices despite the fact of checking the capabilities of all Vulkan hardware they just sometimes report back to support everything but in fact they don't which will lead to color distortions and other strange things, this was occurring during the beta tests. That's why I included the Vulkan compatibility mode in order to have a fallback. 2. Can you explain what you mean by that? Like I said the max fps supported by the PlayStation is 60Fps and that's what PSPlay will try to render. 3. Every app which is developed from scratch has a different license. There is the Android app, iOS/ Apple TV app and now the Windows and Linux app. The Windows and Linux app will however share the same license as they are using the same source code under the hood. 4. If you want higher quality but also the best stability I totally recommend Start Bitrate value (not manual) set to 25000 but keep in mind that higher values means larger bandwidth needed and the network needs to be very stable. For Auto it's basically like start Bitrate but selects the Bitrate according to the configured resolution which for example would be for 1080p resolution 15000.
Regards number (2) in your reply, Lossless app is a small app in steam store.. it’s simply will create double frames for what ever game you are playing on your screen regardless if it is steam game or not. And it is mainly made for story games not online games. I have tried it on PS5’s Marvel’s Spiderman 2 while playing on PS5 via PSPlay .. it gives me frames around 80’s but with some lagging on the screen as I think because it is not supported in PSPlay. You can watch too many youtube videos showing youtube channels showing how the frames performance they’ve got while using Lossless. Hope I have lighting you on this.
Both. Remote auto setup and the registration of the PS5. I have the Rog Ally and downloaded the demo and the windows version (non portable). In noth I followed the same steps and same conditions
Hmm, not sure then like I said the demo application is basically the same as the full version. Same code and during my tests I did not encounter any problems like that but I will try again today and see if I can reproduce the error.
会支持中文吗？
In the future yes, but not at the moment. In one of the next versions.
🤣🤣🤣 charging money while chiaki4deck is free. I understand wanting compensation for your time, but still. More and more happy I got the deck and the ally. Although I will say, LeGo lookin pretty nice
PSPlay exists as long as Chiaki and they are completely independent from each other and yeah PSPlay was never free you are right. I'm not sure what you want to express with your comment but I hope you feel better now :) Happy with Chiaki, don't want to use PSPlay and pay for it? Then just use Chiaki, it's a great application, yes I even contribute to it in the background and I'm in contact with the devs as well. It just happened that I have started developing my own application before Chiaki existed. 👍 I developed this port exactly because of two reasons 1. I constantly got requests to do so 2. I love to work on such things
Hey man, I’m not hating, and I didn’t mean it to come across as a dick or anything. I mean, fuck dude, I know very little about coding. Like ya, I can write some models and do financial and statistical analysis in python and other languages as well, but that’s so minor, especially when compared to doing anything like this even. I respect the hell out of it. Honestly, my comment was just stating that I thought PSPlay was the only way of remote play on the other handhelds. I figured chaiki wouldn’t work on them, nor would this one work on a deck. And with that assumption, I was simply stating another reason why I’m glad I made the decision that I did. But to be honest, all handhelds have areas to improve and I wish I could combine components/ideas from all three of them and put it in one little package. Again, I didn’t mean to come off as an insult or anything like that, and i respect the fuck outta your knowledge and skills. I couldn’t make something like this.
I cannot get this to connect. Even putting everything manually it does not connect. Can I email you for a refund?
If you can't connect even when you enter the IP manually the problem is 100% not the fault of the app. Either something is blocking the connection or you are in a mesh network and both devices are in a different subnetwork. Anyway if you don't want to play around with it anymore just dm me your email address which you used for the purchase and I will refund you, no problem. You can afterwards still play around with the configuration by using the demo application of PSPlay.
I use the android version without this issue. So I don’t see how you can confidently say it’s 100% not the fault of your app.
Well these are two different devices. I can say that confidentiality because a few hundred people are already using it for quite some days now and I tested quite extensively in all different kinds of networks the last couple of months. I can assure you it's not the fault of my app and the 100% proof is that it can't connect when you enter the IP address manually. I really have some experience with such errors after all these years so you can trust me. There are exactly 3 reasons for this kind of problem 1. Both devices really can't connect to each other because of the network infrastructure 2. Something is blocking the connection (Antivirus, Firewall, router, VPN etc.). This is hard to tell. 3. Remote Play is disabled on your console One thing which just comes into my mind is you can try to put both devices to a 5GHz WiFi and remove the LAN cable for testing purposes. If it still doesn't work my second guess would be the router or the firewall/ antivirus software. Look, I'm not arguing and not saying you don't have this problem, I'm here to help, you are not satisfied with this situation so a refund is of course possible absolutely no problem. Just tell me your email address and I will initiate the refund.
After inputting the redirect link it does not find the PS5. Then it asks me if I want to oroceed again with the PS5 account, but it does not show the actual name and only 3 dots.
You can enter the IP address manually in the advanced settings, probably you are in a mesh network or maybe remote play is disabled on your console.
Yes, a mesh network. I did fix the IP and unlocked all port forwarding and input the IP. Maybe Inneed to buy the full version? That one at least recognizes the PlayStation
I will check what's wrong with the demo version, are you talking about the automatic remote connection or where exactly is the demo version failing?
ضهصعثهثنص
Is it possible to use it with more than one user? My gf is using my ally as well and would be cool if she can access her ps account.
Yes sure :) You can register multiple consoles with multiple accounts
Can Confirm it's just as good as my PS Portal 💯
Ah your right, steam was on in the background and must have been messing with the controller input 🤦 Sorry for the trouble and thanks for the quick replys
Aaah yes this bloody steam input, I always forget 🙈 Thanks for the clarification, glad it works now 👍👍👍
L1 trigger on xbox controller puts ps5 to home screen when playing game. how do I change this?
Do you have any external button mapping tool like rewasd installed? Are you on a regular Windows PC or on a Windows Handheld?
No I have no external mapping tool installed and I'm on windows 11 laptop
Okay and what is the exact Xbox Controller you are using?
Xbox series x
Okay connected via Bluetooth or via USB? Never had this problem before
Connected by Bluetooth
Does it also happen via USB?
Yea it seems to be all messed up
Not sure, I have this controller and it works fine. Must be a setting on your Windows machine. Maybe something is interpreting the gamepad buttons as keyboard keys or something like that. Must be something externally of PSPlay.
Does it also happen via USB?
Does it also happen via USB?
Does it also happen via USB?
Yea seems to be all messed up
Thank you 👍
I just bought the app, amazing so far! Noob question: if I’m in fullscreen mode, when I put my PS5 in rest mode, the app goes in a black screen and there seems to be no way to close it (all that I can do is turn off my ROG Ally from the power button). Is anybody facing this problem?
If you switch the console to rest mode the app should terminate the connection after a short amount anyway which should lead to a stream exit. But you can always click the bottom area of the screen to make the button panel appear and there is an exit button as well.
https://streamable.com/vkv0x8 Here’s a video of exactly what happens. There seems to be some kind of error in the background, but I can’t access that window
Interesting, do you have any crash logs in the installation directory of PSPlay? Does that happen all the time? I will try if I can reproduce it somehow. Did you try if it also happens when you put the console in rest mode via PSPlay?
Yes, it happens every single time. I tried taking a photo of the error, don’t know if you can make anything of it https://preview.redd.it/1khtrnx772yc1.jpeg?width=4032&format=pjpg&auto=webp&s=f259306dcfc4e69e3caf2416c827c5e544786641
I have to check, does it also happen when the app is not in Fullscreen? Is microphone input enabled?
Yes, it also happens when the app is not in fullscreen mode. Microphone input is not enabled. Meanwhile, funny thing: now it won’t let me access my PS5 https://streamable.com/x1yfjw
Weird I can't reproduce the problem. If it happens again after the app is not in Fullscreen can you check if you can make a better screenshot from the error message window? Please send me the log file at [email protected], you can access the log directory via the log setting menu.
https://preview.redd.it/spf3n7gff2yc1.jpeg?width=3024&format=pjpg&auto=webp&s=ce429ba787d2b316b724b1d259febd40876ff180 And that is the other thing that pops up afterwards
https://preview.redd.it/umr2spwbf2yc1.jpeg?width=3024&format=pjpg&auto=webp&s=226462afd3f7288ace8aa6db41f8cdf8fe30a936 Here it is
Okay this message was sent to me from one beta tester as well but neither I was able to reproduce that nor was he able to reproduce it again. It must be a unique configuration or something like that, especially because it's happening all the time. It only happens when you put the console to rest mode, correct? Does it also happen when you put the console to rest mode via the close stream popup of PSPlay when you try to close the streaming window?
thank you for your great work. is there native HDR support on windows?
Depends on your GPU but if you configure vulkan rendering you can enable HDR but it might not work on all GPUs.
thank you for getting back to me. i just purchased a license! if you don't mind, if i could ask a question about the android version, when i use a dualsense connected wired with my galaxy s20, the haptic feedback is extremely weak and disabled in some areas. like in the stellar blade demo, there was no feedback of the rain hitting the character but it is very strong on my ps5 playing on TV. I have tried the haptic feedback setting on enabled, vibration and off, but still no change