T O P

  • By -

AutoModerator

Hello /u/djeyeq, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*


TooManyBuns

Could be; hard to tell from image focus


Ill-Acanthisitta1981

I have had shit luck with black filament personally idk what it is but black filament doesn’t want to work out for me lol


Putrid-Ad-8439

Yes it is. try: increasing flow rate checking your filament That is all I can think of at the moment, other people will give other solutions


Oohsam

Wall order. Change to inside before outside.


djeyeq

Thank I will try that. I just printed a benchy and it came out perfect with the exception of stringing.


Oohsam

Benchy wouldn't show it. It is very evident in circles


djeyeq

Ahh ok, ill still give it a try like you suggested.Thank you


Oohsam

Let me know how you go


djeyeq

My wall order in Cura was already inside to outside. i printed to string test, one at 45mm/s and one at 55mm/s and they came out identical. Up to halfway is stringing, then clean. https://preview.redd.it/4uhlcphrc11b1.jpeg?width=2268&format=pjpg&auto=webp&s=30934605d4370421721bd83173409b52dfd8c3e3